How will you use your NTFS disk on your Mac (also free)

Seven appena passati da Windows to Mac e per il passaggio di dati vi siete affidati ad un drive che prima usavate con il vostro PC. Sin che l’NTFS your Mac It is not directly compatible. infatti macOS it is not in degree of scrivere sul filesystem Windows uses the default for large display sizes.

Quindi è del tutto normale che all’inserimento della chiavetta or dell’HHD nel vostro Mac il disco come sì riconosciuto, ma non comunque non sarete in grado di transfervi file. This does not mean that you dovrete necessarily format the disc e dire addio ai vostri dati oppure ricorrere a vie traverse, ad esempio un dispositivo di archiviazione di rete.

Niente da fear quindi, since I will use it on foot and drive NTFS your Mac è più che fattibile, sia con dedicati tool (paid and free) sia con qualche command give terminal. Andiamo quindi a vedere come leggere i dischi Windows su macOS.

Partiamo con le opzioni più accessibili, ovvero quelle per cui non dovrete ricorrere a software a pagamento. For this purpose, provide two main methods for leggere and drive NTFS from your Mac: the tool NTFS–3Goppure a series di command of the terminal.

NTFS–3G

One of the methods can be diffused to read and write your disks and format them in NTFS with macOS è NTFS–3G. If it is a system tool, it will have different passes to be configured correctly. Inoltre per funzionare ha bisogno a sua volta di altri an instrumento aggiuntivo, FUSE for macOSother manager of pacchetti homebrewforniti in maniera del tutto gratuita.

READ  How will I activate Amazon Prime Student?

Prima di procedere partiamo col dire che alcuni di questi instrumenti sono progetti non commerciali quindi le guarantee I’m very limiting.

Inoltre c’è da aggiungere che il file transfer It is not fully supported by the USB 3.0 protocol, so the files may be large enough to be worth several options, and it is not always 100% stable.

So this started to see quali sound and passwords to install NTFS–3G.

  1. Come prima cosa scaricate and install FUSE for macOS from the official site
  2. At this point, if it is not anchored on your Mac, proceed to install the Homebrew package manager with the following command line, launch it in a Terminal session:
    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
  3. Then you can install NTFS–3G. Always give terminal use the following command:
    brew install ntfs-3g
  4. Adesso potete montare il vostro disco con un’apposita serie di commandi commandi. Prima di tutto use this qui botto to identify the name of the partition that I will mount:
    diskutil list
  5. Ammettendo che il nome della partizione sia disk1s1 Proseguite with questi commandi qui sotto, il primo per creare la cartella dove troverete i file del vostro NTFS diskthe second one to effectively mount the disc in letter-script mode:
    sudo mkdir /Volumes/NTFS
    sudo /usr/local/bin/ntfs-3g /dev/disk1s1 /Volumes/NTFS -olocal -oallow_other

Quest’ultimo passaggio vi permetterà di I will mount manually i disk NTFS in read-write, also successively.

Per fare in modo che questo come automatically Every time you insert an NTFS drive you will follow any other passage, no matter what replacement of the native tool for managing NTFS drives with NTFS-3G.

READ  Avira Prime 2020 | Complete Italian Review

If it deals with a procedure that is somewhat delicate and that I saw, let us give this guide dopo aver effettuato backup; remember that i drive così montati lo saranno con privilegi di administratore (occhio ai file sensitivity). Detto questo eccovi i passaggi da seguire.

  1. Da OS X El Capitan e successivi dovrete per prima cosa riavviare in recovery (qui come fare), altrimenti procedete da Terminale
  2. In recovery mode, press the Terminal and perform the backup of the native tool with this command:
    /Volumes/Macintosh HD/sbin/mount_ntfs.orig
  3. Adesso potete I will proceed with the replacement vera e propria
    sudo mv "/Volumes/Macintosh HD/sbin/mount_ntfs" "/Volumes/Macintosh HD/sbin/mount_ntfs.orig"
    sudo ln -s /usr/local/sbin/mount_ntfs "/Volumes/Macintosh HD/sbin/mount_ntfs"
  4. Pot riavviare il Mac

In case I decided to say rimuovere NTFS–3G vi Lasciamo i passaggi da continuar por la corretta uninstallazione del tool.

  1. From Terminal type the following command
    brew uninstall ntfs-3g
  2. If the mount of the NTFS drive is automated, recover the device in recovery (qui come fare)
  3. One turn in recovery press one of the terminals and use the following command
    sudo mv "/Volumes/Macintosh HD/sbin/mount_ntfs.orig" "/Volumes/Macintosh HD/sbin/mount_ntfs"

Avrete cosi rhymes NTFS-3G give you Mac.

Mount NTFS disks with i tool of macOS Sierra

If I am not interested, I will run to third party tool, know that you can run those directly integrated into the system. Il più grande svantaggio è che il drive sparirà dalla lista dei dispositivi sul Finderma dovrete walk it to close in a specific cartella (see procedure below).

If the thing I did not see creates disturbance, magari perché if it deals with a procedure a tantum, ecco come fare:

  1. Connect to the drive and attend to the app in the list of devices in Finder
  2. Press the Terminal and follow the following command
    sudo nano /etc/fstab
  3. In the editor, insert the following code, replacing the NAME value with the tag of the device (the name listed in Finder)
    LABEL=NAME none ntfs rw,auto,nobrowse
  4. Press Ctrl+O to save and Ctrl+X to save
READ  BSoD su Windows: try the latest driver Intel

Attention, alla riconnessone del drive, this will not be displayed on the list of the devices, ma dovrete will walk around the cartella /Volumes of your installation of macOS.

in compensation for I support the writing sarà già abilitato.

If the command of the Terminal is non-fanno because I am close to the maximum speed and stability, we advise you to solve the specific payment for the management of the discs NTFS your macOS. After this most popular is Paragon NTFS.

I saw you install it to start suddenly to read and write your file to the external HDD NTFS. Of course, it is not free, but the cost is not excessive (€19.95 for a lifetime license) and you can still try it free of charge for 10 days.

Tuxera is a software with gli stessi principi, it costs a little bit (€25) but trial period I gave 15 days. Avete così all the time to test all the solutions (not used contemporaneously) and capire quale if it is better alle you choose.

DON’T LOSE

Post Author Name

Hey Guys this is Mohammed Asif Who has a passionate blogger, Student, and die-hard Lawyer fan of John Cena and loves to read various books and novels. I share guides on windows, tech, apps, ios, and other Categories.

Leave a Comment

blank